PCI-6239

The National Instruments PCI-6239 is an isolated M Series multifunction data acquisition (DAQ) board. It combines the safety and performance benefits of isolation with high-performance timing, amplification, and calibration technologies to offer accurate measurements and precise control.

Isolation provides:
1. Safety from transients
2. Noise rejection
3. Reduced ground loops
4. Common-mode voltage rejection

The PCI-6239 is ideal for test, measurement, control, and design applications in environments with high voltages and electrical noise. You can use the PCI-6239 to read from encoders, flow meters, and proximity sensors as well as control valves, pumps, and relays; and connect up to other common 20 mA sensors.

The isolated M Series family of devices incorporates advanced M Series technologies including the NI-STC 2 system controller, NI-PGIA 2 programmable instrumentation amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about and download driver software. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
With NI LabVIEW, you can create custom DAQ applications with the ease of graphical programming and power of more than 500 analysis functions. LabVIEW Full and Professional Development Systems include LabVIEW SignalExpress for interactive data logging. M Series DAQ devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series DAQ devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• 60 VDC continuous bank isolation, 1,400 Vrms/1,950 VDC channel-to-bus isolation, withstand for 5 s
• 2 analog outputs (0 to 20 mA), 16-bit resolution, up to 500 kS/s
• 6 digital input and 4 digital output, 24 V sinking
• 2 counter/timers, 32-bit resolution, 80 MHz; digital triggering
• NI-MCal calibration technology for increased measurement accuracy
• NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software

PCI-6236

The National Instruments PCI-6236 is an isolated M Series multifunction data acquisition (DAQ) board. It combines the safety and performance benefits of isolation with high-performance timing, amplification, and calibration technologies to offer accurate measurements and precise control.

Isolation provides:
1. Safety from transients
2. Noise rejection
3. Reduced ground loops
4. Common-mode voltage rejection

The PCI-6236 is ideal for test, measurement, control, and design applications in environments with high voltages and electrical noise. You can use the PCI-6236 to read from encoders, flow meters, and proximity sensors as well as control valves, pumps, and relays; and connect up to other common 20 mA sensors.

The isolated M Series family of devices incorporates advanced M Series technologies including the NI-STC 2 system controller, NI-PGIA 2 programmable instrumentation amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about and download driver software. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
With NI LabVIEW, you can create custom DAQ applications with the ease of graphical programming and power of more than 500 analysis functions. LabVIEW Full and Professional Development Systems include LabVIEW SignalExpress for interactive data logging. M Series DAQ devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series DAQ devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• 60 VDC continuous bank isolation, 1,400 Vrms/1,950 VDC channel-to-bus isolation withstand for 5 s
• 4 analog outputs (±10 V), 16-bit resolution, up to 500 kS/s
• 6 digital input and 4 digital output, 5 V TTL/CMOS
• 2 counter/timers, 32-bit resolution, 80 MHz; digital triggering
• NI-MCal calibration technology for increased measurement accuracy
• NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software

PCI-6509

The NI PCI-6509 industrial 96-channel digital I/O board for PCI features 96 bidirectional digital I/O lines with high current drive capability (24 mA) and is completely jumperless. With the PCI-6509, you can input and output at 5 VDC digital levels and directly drive external digital devices such as solid-state relays (SSRs) with current up to 24 mA per channel. You can configure each port (eight lines) for input or output, and no external power supply is required for outputs.

Using programmable power-up states, you can configure the initial output states in software to ensure glitch-free, safe operations when connected to industrial actuators (pumps/valves/motors/relays).

For applications that require onboard pull-up resistors, consider the NI PCI-DIO-96 parallel digital I/O board.

If a computer or application fault occurs, the PCI-6509 can use digital I/O watchdogs to switch to a configurable safe output state to ensure detection and safe recovery from fault conditions when connected to industrial actuators. With change detection, the digital I/O board notifies and triggers your software application when a digital change of state occurs (without polling). Programmable input filters eliminate glitches/spikes and provide debouncing for digital switches/relays through a software-selectable digital filter.

NI-DAQmx software technology includes the DAQ Assistant to create your application with no programming. NI-DAQmx makes it fast and easy to configure your device and take advantage of all the high-reliability industrial features in NI LabVIEW, ANSI C, Microsoft Visual C++, or Microsoft .NET languages (C# and Visual Basic .NET).

• 96 bidirectional digital I/O lines, 5 V TTL/CMOS (line direction selectable on an 8-bit port basis)
• High-current drive (24 mA sink or source)
• Programmable DO power-up states, DIO watchdogs, change detection, programmable input filters
• NI-DAQmx software technology for highest productivity and performance (NI-DAQmx 7.1 and later)
• Low-cost solution with advanced features for manufacturing test and industrial control applications

PCI-7811R

The NI PCI-7811R digital RIO board features a user-programmable FPGA chip for onboard processing and flexible I/O operation. You configure all functionality using NI LabVIEW graphical block diagrams and the LabVIEW FPGA Module. Your block diagram executes in the hardware, giving you direct, immediate control over all I/O signals to deliver high-performance capabilities such as the following:

-Complete control over the synchronization and timing of all signals and operations
-Custom onboard decision making that executes with hardware-timed speed and reliability
-160 digital lines individually configurable as inputs, outputs, counter/timers, pulse-width modulation, flexible encoder inputs, or specialized communication protocols

With R Series digital RIO devices and LabVIEW FPGA, you can configure user-defined hardware for a wide variety of applications, such as custom digital data acquisition, high-speed waveform generation, sensor simulation, hardware-in-the-loop (HIL) test, custom digital communications protocols, bit error rate testing, and other applications that require precise timing and control.

Recommended Accessories
The NI SHC-68-68-RDIO cable is designed and shielded specifically for the digital I/O (DIO) connectors on R Series digital RIO devices for improved signal integrity when connected to terminal blocks or the NI 9151 R Series expansion chassis.

Low-Cost, High-Performance Signal Conditioning
The NI 9151 R Series expansion chassis connects directly to any digital connector on R Series devices and houses up to four NI C Series I/O modules for low-cost signal conditioning, I/O channel expansion, and direct connectivity.

• 160 digital lines configurable as inputs, outputs, counters, or custom logic at rates up to 40 MHz
• Virtex-II 1M gate FPGA programmable with the LabVIEW FPGA Module
• User-defined triggering, timing, and onboard decision making with 25 ns resolution
• Connectivity to the NI 9151 for analog and digital I/O expansion/signal conditioning
• High-speed digital pattern generation with 80 KB of onboard memory and DMA data streaming
• Examples for I2C, SPI, S/PDIF, RS232, and other digital communication protocols

PCI-6511

The National Instruments PCI-6511 board is an industrial 64-channel isolated digital input interface for PCI. The NI PCI-6511 has 64 digital inputs with isolation provided in banks of eight channels. NI-DAQmx makes it fast and easy to configure your device and take advantage of all the high-reliability industrial features with automatic code generation in LabVIEW, ANSI C, Microsoft Visual C++, or Microsoft .NET Languages (C# and Visual Basic .NET). Learn more about low-cost industrial data acquisition technologies from NI!

• Low-cost solution with advanced features for industrial control and manufacturing test applications
• 64 sink/source inputs (±30 VDC)
• Optical isolation in banks of eight channels
• High-reliability industrial feature set
• Guaranteed industrial 24 V logic thresholds, change detection, programmable input filters
• NI-DAQmx software technology for highest productivity and performance (NI-DAQmx 7.2 and higher)

PCI-6512

The National Instruments PCI-6512 board is an industrial 64-channel isolated digital output interface for PCI. The NI PCI-6512 has 64 digital outputs with isolation provided in banks of eight channels. With programmable power-up states, you can configure the initial output states in software, to ensure safe operation when connected to industrial actuators (pumps/valves/motors/relays). Using digital I/O watchdogs, the device can go to a configurable safe output state if a computer or application fault occurs. NI-DAQmx makes it fast and easy to configure your board and take advantage of all the high reliability industrial features with automatic code generation in LabVIEW, ANSI C, Microsoft Visual C++, or Microsoft .NET Languages (C# and Visual Basic .NET).

• Low-cost solution with advanced features for industrial control and manufacturing test applications
• 64 source outputs (±30 VDC, 350 mA for one channel, 75 mA for all channels)
• Optical isolation in banks of 8 channels
• High-reliability industrial feature set
• Watchdogs, programmable power-up states, change detection, high current drive
• NI-DAQmx software technology for highest productivity and performance (NI-DAQmx 7.2 and higher)

PCI-6513

The National Instruments PCI-6513 board is an industrial 64-channel isolated digital output interface for PCI. The NI PCI-6513 has 64 digital outputs with isolation provided in banks of eight channels. With programmable power-up states, you can configure the initial output states in software, to ensure safe operation when connected to industrial actuators (pumps/valves/motors/relays). Using digital I/O watchdogs, the board can go to a configurable safe output state if a computer or application fault occurs. NI-DAQmx makes it fast and easy to configure your device and take advantage of all the high reliability industrial features with automatic code generation in LabVIEW, ANSI C, Microsoft Visual C++, or Microsoft .NET Languages (C# and Visual Basic .NET).

• Low-cost solution with advanced features for industrial control and manufacturing test applications
• 64 sink outputs (±30 VDC, 475 mA for one channel, 125 mA for all channels)
• Optical isolation in banks of eight channels
• High-reliability industrial feature set
• Watchdogs, programmable power-up states, change detection, high current drive
• NI-DAQmx software technology for highest productivity and performance (NI-DAQmx 7.2 and higher)

PCI-6514

The National Instruments PCI-6514 board is an industrial 64-channel isolated digital I/O interface for PCI. The NI PCI-6514 inputs and outputs are optically isolated in banks of eight channels. With programmable power-up states, you can configure the initial output states in software, to ensure safe operation when connected to industrial actuators (pumps/valves/motors/relays). Using digital I/O watchdogs, the board can go to a configurable safe output state if a computer or application fault occurs. NI-DAQmx makes it fast and easy to configure your board and take advantage of all the high-reliability industrial features with automatic code generation in LabVIEW, ANSI C, Microsoft Visual C++, or Microsoft .NET Languages (C# and Visual Basic .NET). Learn more about low-cost industrial data acquisition technologies from NI!

• Low-cost solution with advanced features for industrial control and manufacturing test applications
• 32 bank-isolated sink/source inputs (±30 VDC)
• 32 bank-isolated source outputs (±30 VDC,
  350 mA for one channel, 75 mA for all channels)
• High-reliability industrial feature set: guaranteed industrial 24 V logic thresholds
• Watchdogs, programmable power-up states, change detection, input filters, high current drive
• NI-DAQmx software technology for highest productivity and performance (NI-DAQmx 7.1 and higher)

PCI-6515

The National Instruments PCI-6515 board is an industrial 64-channel isolated digital I/O interface for PCI. The NI PCI-6515, which has 32 digital inputs with optical isolation provided in banks of eight channels, is completely jumper free. You can wire each input bank in a source or sink configuration. The module has 32 sink digital outputs in 8-channel banks. With the PCI-6515, you can input and output at digital levels up to 30 VDC and switch currents of up to 475 mA for one channel per bank. Isolation protects your system from noise and spikes and breaks ground loops. Using the programmable power-up states, you can configure the initial output states in software to ensure glitch-free, safe operations when connected to industrial actuators(pumps/valves/motors/relays). Using the digital I/O watchdogs, the board can go to a configurable safe output state if a computer or application fault occurs, providing fault detection recovery. With change detection, the PCI-6515 notifies and triggers your software application when a digital change of state occurs (without polling). Programmable input filters eliminate noise and provide debouncing for digital switches/relays through a software-selectable filter. The NI-DAQmx software technology includes NI DAQ Assistant to create your application with no programming. NI-DAQmx makes it fast and easy to configure your device and take advantage of all the high-reliability industrial features in LabVIEW, ANSI C, Microsoft Visual C++, or Microsoft .NET Languages (C# and Visual Basic .NET).

• High-reliability industrial feature set: guaranteed industrial 24 V logic thresholds
• Watchdogs, programmable power-up states, change detection, input filters, high current drive
• NI-DAQmx software technology for highest productivity and performance (NI-DAQmx 7.1 and higher
• Low-cost solution with advanced features for industrial control and manufacturing test applications
• 32 bank-isolated sink/source inputs (±30 VDC)
• 32 bank-isolated sink outputs (±30 VDC, 475 mA for one channel, 125 mA for all channels)

PCI-6510

The National Instruments PCI-6510 board offers 32 optically isolated digital input channels with low-cost 37-pin accessory connectivity. The NI PCI-6510 has 32 digital inputs with optical isolation provided in a single bank of 32 channels. NI-DAQmx makes it fast and easy to configure your device and take advantage of all the high-reliability industrial features with automatic code generation in LabVIEW, ANSI C, Microsoft Visual C++, or Microsoft .NET Languages (C# and Visual Basic .NET). For optical isolation in banks of eight channels, consider the PCI-6511 board. For channel-channel isolation and a ±60 V input range consider the PCI-6528 board.

• Low-cost solution with advanced features for industrial control and manufacturing test applications
• Low-cost connectivity with 37-pin accessories
• High-reliability industrial feature set including optical isolation
• Guaranteed industrial 24 V logic thresholds, change detection, programmable input filters
• NI-DAQmx Measurement Services software for highest productivity and performance (v 7.2 and higher)
• 32 sink/source inputs (±30 VDC range)