PCI-6133

 DATA SHEET
The NI PCI-6133 S Series multifunction data acquisition (DAQ) board features a dedicated analog-to-digital converter (ADC) per channel for maximum device throughput and higher multichannel accuracy.

The PCI-6133 is a full-length PCI board. Please verify with your PC vendor that there is sufficient room in the computer chassis to house this board. See the KnowledgeBase article in the Resources tab for more information.

Enable Warp Mode to Achieve Maximum Sampling Rates
PCI-6133 analog inputs sample up to 2.5 MS/s using the onboard sample clock; they also can sample up to 3 MS/s using one of the onboard counters or an external reference as the sample clock. Download the LabVIEW example from the Resources tab to enable warp mode and achieve the maximum sampling rates.

Application Software
With NI LabVIEW software, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. NI S Series DAQ devices are compatible with the following versions (or later) of NI application software - LabVIEW 7.x, LabWindows/CVI 7.x, or Measurement Studio 7.x and LabVIEW SignalExpress 1.x. S Series DAQ devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.0.

NI-DAQmx Driver Software
Quickly gather real-world data with NI-DAQmx driver software featuring measurement-ready virtual channels and configuration abilities using the DAQ Assistant.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

• 8 simultaneously sampled analog inputs, up to 2.5 or 3 MS/s in warp mode (see Overview tab)
• 4 input ranges from ±1.25 to ±10 V
• Deep onboard memory (16 or 32 MS)
• 8 hardware-timed digital I/O lines; two 24-bit counters; analog and digital triggering
• Included NI-DAQmx driver software and LabVIEW SignalExpress interactive data-logging software
• Optimized integration with NI LabVIEW, LabWindows™/CVI, and Measurement Studio

PCI-6722

 The NI PCI-6722 delivers low-cost analog outputs to meet a wide range of application requirements. It provides eight analog output channels with speeds of 182 kS/s per channel, 13-bit resolution, and digital triggering. This board also features eight digital I/O and two 24-bit counter/timers. It uses the RTSI bus to synchronize with additional data acquisition, motion, and vision products, so you can create custom measurement solutions to test innovative designs. The PCI-6722 is ideal for applications such as stimulus-response, signal simulation, waveform generation, and actuator stimulation. It works with NI Analog Waveform Editor software to help you create complex waveforms. You can create new waveforms using the more than 20 built-in waveform primitives or formula/equation entry features of this software.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

• 800 kS/s per channel for one channel; 182 kS/s per channel for 8 channels
• Slew rate limited to 10 kHz full-scale sine wave
• Simultaneous update; onboard or external update clock
• RTSI bus for synchronization with DAQ, motion, and vision products
• NI-DAQmx driver with configuration utility to simplify configuration and measurements
• Superior integration: LabVIEW, LabWindows™/CVI, and Measurement Studio for VB and VS .NET

PCI-6723

 The NI PCI-6723 board delivers low-cost, high-density analog outputs to meet a wide range of application requirements. It provides 32 analog output channels with speeds of 45 kS/s per channel, 13-bit resolution, and digital triggering. In addition to analog output, this board features eight digital I/O and two 24-bit counter/timers. It uses the RTSI bus to synchronize with additional data acquisition, motion, and vision products, so you can create custom measurement solutions to test innovative designs. The PCI-6723 is ideal for applications such as stimulus-response, signal simulation, waveform generation, and actuator stimulation. This board works with NI Analog Waveform Editor software to help you create complex waveforms. You can create new waveforms using the more than 20 built-in waveform primitives or formula/equation entry features of this software.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

• 800 kS/s per channel for one channel; 45 kS/s per channel for 32 channels
• Slew rate limited to 10 kHz full-scale sine wave
• Simultaneous update; onboard or external update clock
• RTSI bus for synchronization with DAQ, motion, and vision products
• NI-DAQmx driver with configuration utility to simplify configuration and measurements
• Superior integration: LabVIEW, LabWindows™/CVI, and Measurement Studio for VB and VS .NET

PCI-7831R

 The NI PCI-7831R multifunction RIO board features a user-programmable FPGA chip for onboard processing and flexible I/O operation. You configure all analog and digital functionality using NI LabVIEW graphical block diagrams and the LabVIEW FPGA Module. Your block diagram executes in the hardware, giving you direct, immediate control over all I/O signals to deliver high-performance capabilities such as the following:

-Complete control over the synchronization and timing of all signals and operations
-Custom onboard decision making that executes with hardware-timed speed and reliability
-Digital lines individually configurable as inputs, outputs, counter/timers, pulse-width modulation, flexible encoder inputs, or specialized communication protocols

NI R Series multifunction RIO devices feature a dedicated analog-to-digital converter (ADC) per channel for independent timing and triggering. This offers specialized functionality such as multirate sampling and individual channel triggering, which are outside the capabilities of typical data acquisition hardware. Common examples include custom discrete and analog control, sensor simulation, rapid prototyping, hardware-in-the-loop (HIL) test, digital protocol emulation, and other applications that require precise timing and control.

Recommended Accessories
The NI SHC68-68-RMIO cable is designed and shielded specifically for the multifunction I/O connector (connector 0) of R Series devices. The NI SHC68-68-RDIO cable is designed and shielded specifically for the digital I/O connectors (connectors 1 and 2) on R Series devices to reduce crosstalk for improved signal integrity and noise rejection.

Low-Cost, High-Performance Signal Conditioning
The NI 9151 R Series expansion chassis connects directly to any digital connector on R Series devices and houses up to four NI C Series I/O modules for low-cost signal conditioning, I/O channel expansion, and direct connectivity.

• 8 analog inputs, independent sampling rates up to 200 kHz, 16-bit resolution, ±10 V
• 8 analog outputs, independent update rates up to 1 MHz, 16-bit resolution, ±10 V
• 96 digital lines configurable as inputs, outputs, counters, or custom logic at rates up to 40 MHz
• Virtex-II 1M gate FPGA programmable with the LabVIEW FPGA Module
• Connectivity to the NI 9151 for I/O expansion and low-cost signal conditioning
• 3 DMA channels for high-speed data streaming

PCI-7830R

The NI PCI-7830R multifunction RIO board features a user-programmable FPGA chip for onboard processing and flexible I/O operation. You configure all analog and digital functionality using NI LabVIEW graphical block diagrams and the LabVIEW FPGA Module. Your block diagram executes in the hardware, giving you direct, immediate control over all I/O signals to deliver high-performance capabilities such as the following:

-Complete control over the synchronization and timing of all signals and operations
-Custom onboard decision making that executes with hardware-timed speed and reliability
-Digital lines individually configurable as inputs, outputs, counter/timers, pulse-width modulation, flexible encoder inputs, or specialized communication protocols

NI R Series multifunction RIO devices feature a dedicated analog-to-digital converter (ADC) per channel for independent timing and triggering. This offers specialized functionality such as multirate sampling and individual channel triggering, which are outside the capabilities of typical data acquisition hardware. Common examples include custom discrete and analog control, sensor simulation, rapid prototyping, hardware-in-the-loop (HIL) test, digital protocol emulation, and other applications that require precise timing and control.

Recommended Accessories
The NI SHC68-68-RMIO cable is designed and shielded specifically for the multifunction I/O connector (connector 0) of R Series devices. The NI SHC68-68-RDIO cable is designed and shielded specifically for the digital I/O connectors (connectors 1 and 2) on R Series devices to reduce crosstalk for improved signal integrity and noise rejection.

Low-Cost, High-Performance Signal Conditioning
The NI 9151 R Series expansion chassis connects directly to any digital connector on R Series devices and houses up to four NI C Series I/O modules for low-cost signal conditioning, I/O channel expansion, and direct connectivity.

• 4 analog inputs, independent sampling rates up to 200 kHz, 16-bit resolution, ±10 V
• 4 analog outputs, independent update rates up to 1 MHz, 16-bit resolution, ±10 V
• 56 digital lines configurable as inputs, outputs, counters, or custom logic at rates up to 40 MHz
• Virtex-II 1M gate FPGA programmable with the LabVIEW FPGA Module
• Connectivity to the NI 9151 for I/O expansion and low-cost signal conditioning
• 3 DMA channels for high-speed data streaming

PCI-7833R

 The NI PCI-7833R multifunction RIO board features a user-programmable FPGA chip for onboard processing and flexible I/O operation. You configure all analog and digital functionality using NI LabVIEW graphical block diagrams and the LabVIEW FPGA Module. Your block diagram executes in the hardware, giving you direct, immediate control over all I/O signals to deliver high-performance capabilities such as the following:

-Complete control over the synchronization and timing of all signals and operations
-Custom onboard decision making that executes with hardware-timed speed and reliability
-Digital lines individually configurable as inputs, outputs, counter/timers, pulse-width modulation, flexible encoder inputs, or specialized communication protocols

NI R Series multifunction RIO devices feature a dedicated analog-to-digital converter (ADC) per channel for independent timing and triggering. This offers specialized functionality such as multirate sampling and individual channel triggering, which are outside the capabilities of typical data acquisition hardware. Common examples include custom discrete and analog control, sensor simulation, rapid prototyping, hardware-in-the-loop (HIL) test, digital protocol emulation, and other applications that require precise timing and control.

Recommended Accessories
The NI SHC68-68-RMIO cable is designed and shielded specifically for the multifunction I/O connector (connector 0) of R Series devices. The NI SHC68-68-RDIO cable is designed and shielded specifically for the digital I/O connectors (connectors 1 and 2) on R Series devices to reduce crosstalk for improved signal integrity and noise rejection.

Low-Cost, High-Performance Signal Conditioning
The NI 9151 R Series expansion chassis connects directly to any digital connector on R Series devices and houses up to four NI C Series I/O modules for low-cost signal conditioning, I/O channel expansion, and direct connectivity.

• 8 analog inputs, independent sampling rates up to 200 kHz, 16-bit resolution, ±10 V
• 8 analog outputs, independent update rates up to 1 MHz, 16-bit resolution, ±10 V
• 96 digital lines configurable as inputs, outputs, counters, or custom logic at rates up to 40 MHz
• Virtex-II 3M gate FPGA programmable with the LabVIEW FPGA Module
• Connectivity to the NI 9151 for I/O expansion and low-cost signal conditioning
• 3 DMA channels for high-speed data streaming

PCI-6143

 The National Instruments PCI-6143 S Series multifunction data acquisition (DAQ) board combines the latest in low-cost PC technologies to deliver simultaneous sampling for data acquisition and control systems requiring high channel counts. A dedicated analog-to-digital converter (ADC) per channel allows for maximum device throughput and higher multichannel accuracy. With 250 kS/s per-channel sampling rates, two 24-bit counter/timers, and eight digital I/O lines, the NI PCI-6143 can be used in a variety of applications, including:

- High-speed, continuous data logging
- Transient and ballistics measurements
- Radar, sonar, ultrasound
- High-energy physics
- IF digitization

The PCI-6143 provides a very low cost per channel while maintaining high dynamic accuracy and simultaneity. These boards are useful for OEM applications that require more than one channel and higher throughput per channel than a multiplexed architecture can provide.

Application Software
With NI LabVIEW, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. Every copy of LabVIEW also includes LabVIEW SignalExpress interactive data-logging software.

NI-DAQmx Driver Software
NI-DAQmx driver software goes far beyond a basic data acquisition driver to deliver increased productivity and performance in data acquisition and control application development. NI-DAQmx controls every aspect of your data acquisition system, from configuration, to programming, to low-level operating system and device control. Quickly gather real-world data with measurement-ready virtual channels and the DAQ Assistant. Build your applications with measurement-specific VIs, functions, and data types. Reliably make your measurements faster with optimized DMA data transfer and single-point I/O.

For additional information and related products, visit the Resources tab.

The mark LabWindows is used under a license from Microsoft Corporation.

• 8 low-cost, simultaneously sampled analog inputs
• 16-bit resolution, up to 250 kS/s per channel
• Up to 2 MS/s aggregate sampling rates for high overall device throughput
• 8 digital I/O lines; two 24-bit counters; digital triggering
• Included NI-DAQmx driver software and LabVIEW SignalExpress interactive data-logging software
• Optimized integration with NI LabVIEW, LabWindows™/CVI, and Measurement Studio

PCI-6220

 The National Instruments PCI-6220 is a low-cost multifunction M Series data acquisition (DAQ) board optimized for cost-sensitive applications. Also consider the high-speed M Series devices for 5X faster sampling rates or the high-accuracy M Series devices for 4X resolution and superior measurement accuracy.

Low-cost M Series devices incorporate advanced features such as the NI-STC 2 system controller, NI-PGIA 2 programmable amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, device specifications, and information on recommended cables and accessories, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about driver software or download a driver. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
Every M Series data acquisition device includes a copy of NI LabVIEW SignalExpress so you can quickly acquire, analyze, and present data without programming. In addition to LabVIEW SignalExpress, M Series data acquisition devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series data acquisition devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• 24 digital I/O; 32-bit counters; digital triggering
• NI-MCal calibration technology for increased measurement accuracy
• Correlated DIO (8 clocked lines, 1 MHz)
• NIST-traceable calibration certificate and more than 70 signal conditioning options
• Select high-speed M Series for 5X faster sampling rates or high-accuracy M Series for 4X resolution
• NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software

PCI-6224

 The National Instruments PCI-6224 is a low-cost multifunction M Series data acquisition (DAQ) board optimized for cost-sensitive applications. Also consider the high-speed M Series devices for 5X faster sampling rates or the high-accuracy M Series devices for 4X resolution and superior measurement accuracy.

Low-cost M Series devices incorporate advanced features such as the NI-STC 2 system controller, NI-PGIA 2 programmable amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, device specifications, and information on recommended cables and accessories, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about driver software or download a driver. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
Every M Series data acquisition device includes a copy of NI LabVIEW SignalExpress so you can quickly acquire, analyze, and present data without programming. In addition to LabVIEW SignalExpress, M Series data acquisition devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series data acquisition devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• 48 digital I/O; 32-bit counters; digital triggering
• NI-MCal calibration technology for increased measurement accuracy
• NIST-traceable calibration certificate and more than 70 signal conditioning options
• Correlated DIO (32 clocked lines, 1 MHz)
• Select high-speed M Series for 5X faster sampling rates or high-accuracy M Series for 4X resolution.
• NI-DAQmx driver software and NI LabVIEW SignalExpress interactive data-logging software

PCI-6229

 The National Instruments PCI-6229 is a low-cost multifunction M Series data acquisition (DAQ) board optimized for cost-sensitive applications. Also consider the high-speed M Series devices for 5X faster sampling rates or the high-accuracy M Series devices for 4X resolution and superior measurement accuracy.

Low-cost M Series devices incorporate advanced features such as the NI-STC 2 system controller, NI-PGIA 2 programmable amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, device specifications, and information on recommended cables and accessories, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about driver software or download a driver. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
Every M Series data acquisition device includes a copy of NI LabVIEW SignalExpress so you can quickly acquire, analyze, and present data without programming. In addition to LabVIEW SignalExpress, M Series data acquisition devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series data acquisition devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• Four 16-bit analog outputs (833 kS/s)
• 48 digital I/O; 32-bit counters; digital triggering
• Correlated DIO (32 clocked lines, 1 MHz)
• NIST-traceable calibration certificate and more than 70 signal conditioning options
• Select high-speed M Series for 5X faster sampling rates or high-accuracy M Series for 4X resolution.
• NI-DAQmx driver software and NI LabVIEW SignalExpress interactive data-logging software