PCI-6225

The National Instruments PCI-6225 is a low-cost multifunction M Series data acquisition (DAQ) board optimized for cost-sensitive applications. For optimal performance using the NI PCI-6255, NI recommends using the SHC68-68-EPM cable for connector 0 and the SHC68-68 cable for connector 1. The SCC-68 or other NI signal conditioning accessories are not compatible with connector 1. Also consider the PCI-6255 for 80-measurement channels at 1.25 MS/s single-channel sampling rate.

Low-cost M Series devices incorporate advanced features such as the NI-STC 2 system controller, NI-PGIA 2 programmable amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, device specifications, and information on recommended cables and accessories, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about driver software or download a driver. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
Every M Series data acquisition device includes a copy of NI LabVIEW SignalExpress so you can quickly acquire, analyze, and present data without programming. In addition to LabVIEW SignalExpress, M Series data acquisition devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series data acquisition devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• Two 16-bit analog outputs (833 kS/s)
• 24 digital I/O; two 32-bit counters; digital triggering
• Correlated DIO (8 clocked lines, 1 MHz)
• NIST-traceable calibration and more than 70 signal conditioning options
• Select high-speed M Series for 5x faster sampling rates or high-accuracy M Series for 4x resolution
• Includes NI-DAQmx, LabVIEW SignalExpress LE data-logging software, and other measurement services

PCI-6225

The National Instruments PCI-6225 is a low-cost multifunction M Series data acquisition (DAQ) board optimized for cost-sensitive applications. For optimal performance using the NI PCI-6255, NI recommends using the SHC68-68-EPM cable for connector 0 and the SHC68-68 cable for connector 1. The SCC-68 or other NI signal conditioning accessories are not compatible with connector 1. Also consider the PCI-6255 for 80-measurement channels at 1.25 MS/s single-channel sampling rate.

Low-cost M Series devices incorporate advanced features such as the NI-STC 2 system controller, NI-PGIA 2 programmable amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, device specifications, and information on recommended cables and accessories, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about driver software or download a driver. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
Every M Series data acquisition device includes a copy of NI LabVIEW SignalExpress so you can quickly acquire, analyze, and present data without programming. In addition to LabVIEW SignalExpress, M Series data acquisition devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series data acquisition devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• Two 16-bit analog outputs (833 kS/s)
• 24 digital I/O; two 32-bit counters; digital triggering
• Correlated DIO (8 clocked lines, 1 MHz)
• NIST-traceable calibration and more than 70 signal conditioning options
• Select high-speed M Series for 5x faster sampling rates or high-accuracy M Series for 4x resolution
• Includes NI-DAQmx, LabVIEW SignalExpress LE data-logging software, and other measurement services

PCI-6010

 DATA SHEET
Providing guaranteed measurement accuracy at a low price, National Instruments B Series multifunction DAQ boards are ideal for a wide variety of OEM products or simple applications in laboratory automation, research, design verification/test, and manufacturing test. The National Instruments PCI-6010 is a low-cost multifunction I/O data acquisition board offering analog input, analog output, and digital and counter/timer I/O. Using the 37 pin D-Sub connector, you can connect the NI PCI-6010 to many available D-Sub components. For large orders and OEM users, the PCI-6010 is available in 50-board packs at a reduced price.

Driver Software
The PCI-6010 works with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about driver software or download a driver. The PCI-6010 is not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
Every B Series data acquisition device includes a copy of NI LabVIEW SignalExpress LE so you can quickly acquire, analyze, and present data without programming. In addition to LabVIEW SignalExpress, B Series data acquisition devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series data acquisition devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• Two 16-bit analog outputs
• 10 digital lines (6 DI, 4 DO); two 32-bit, 80 MHz counter/timers
• 37-pin D-Sub connector reduces connectivty costs by 80%
• Basic functionality; upgrade to M Series for increased DAQ performance
• 50-board package available at discount pricing
• NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software

PCI-6221

The National Instruments PCI-6221 (37-Pin) DAQ board offers a cost-efficient solution for OEM customers because of its 37-pin D-Sub I/O connector. The D-Sub connector provides compatibility with other standard D-Sub accessories, including low-cost direct-mount terminal blocks such as the NI CB-37F-LP. For applications requiring higher speeds and increased accuracy, consider the high-speed M Series for 5X faster sampling rates and the high-accuracy M Series for 4X better resolution.

Low-cost M Series devices incorporate advanced features such as the NI-STC 2 system controller, NI-PGIA 2 programmable amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, device specifications, and information on recommended cables and accessories, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about driver software or download a driver. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
Every M Series data acquisition device includes a copy of NI LabVIEW SignalExpress so you can quickly acquire, analyze, and present data without programming. In addition to LabVIEW SignalExpress, M Series data acquisition devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series data acquisition devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• Two 16-bit analog outputs (833 kS/s)
• 10 digital I/O lines; 32-bit counters; digital triggering
• Correlated DIO (2 clocked lines, 1 MHz)
• 37-pin D-Sub connector to reduce connectivty costs by 80%
• Select high-speed M Series for 5X faster sampling rates or high-accuracy M Series for 4X resolution.
• NI-DAQmx driver software and NI LabVIEW SignalExpress interactive data-logging software

PCI-6154

 DATA SHEET
The National Instruments PCI-6154 is a channel-to-channel isolated, simultaneous sampling multifunction data acquisition (DAQ) board. It combines the safety of isolation with high-performance timing and calibration technologies and per-channel dedicated analog-to-digital converters (ADCs) to offer extreme reliability, accurate measurements, and precise control. Isolation provides:

- Safety from transients
- Noise rejection
- Reduced ground loops

The NI PCI-6154 features four differential simultaneously sampled 16-bit analog inputs and outputs with channel-to-channel isolation and 250 kS/s sampling. You can combine the channel-to-channel isolated analog outputs to generate signals greater than ±10 V (up to ±40 V by combining all four channels). The PCI-6154 also offers six digital inputs, four digital outputs, two counter/timers, and digital triggering.

Designed to deliver reliable measurements in virtually any environment, the PCI-6154 isolated DAQ board is ideal for a wide variety of applications, including:

- Automotive test
- Industrial monitoring and control
- High-speed continuous data logging
- Measurements requiring synchronization among analog input, analog output, digital I/O, and counter/timer operations

Application Software
With NI LabVIEW, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. Every copy of LabVIEW also includes LabVIEW SignalExpress interactive data-logging software.

NI-DAQmx Driver Software
NI-DAQmx driver software goes far beyond a basic data acquisition driver to deliver increased productivity and performance in data acquisition and control application development. NI-DAQmx controls every aspect of your data acquisition system, from configuration, to programming, to low-level operating system and device control. Quickly gather real-world data with measurement-ready virtual channels and the DAQ Assistant. Build your applications with measurement-specific VIs, functions, and data types. Reliably make your measurements faster with optimized DMA data transfer and single-point I/O.

For additional information and related products, visit the Resources tab.

• 4 simultaneously sampled analog inputs, 16-bit, 250 kS/s per channel
• 4 simultaneous analog outputs, 16-bit, 250 kS/s per channel
• 60 VDC continuous channel-to-channel isolation
• 1,400 Vrms/1,950 VDC channel-to-bus isolation withstand for 5 s
• 6 digital inputs, 4 digital outputs, two 32-bit counters, digital triggering
• Included NI-DAQmx driver software and LabVIEW SignalExpress interactive data-logging software

PCI-6230

The National Instruments PCI-6230 is an isolated M Series multifunction data acquisition (DAQ) board. It combines the safety and performance benefits of isolation with high-performance timing, amplification, and calibration technologies to offer accurate measurements and precise control.

Isolation provides:
1. Safety from transients
2. Noise rejection
3. Reduced ground loops
4. Common-mode voltage rejection

The PCI-6230 is ideal for test, measurement, control, and design applications in environments with high voltages and electrical noise. You can use the PCI-6230 to read from encoders, flow meters, and proximity sensors as well as control valves, pumps, and relays.

The isolated M Series family of devices incorporates advanced M Series technologies including the NI-STC 2 system controller, NI-PGIA 2 programmable instrumentation amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about and download driver software. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
With NI LabVIEW, you can create custom DAQ applications with the ease of graphical programming and power of more than 500 analysis functions. LabVIEW Full and Professional Development Systems include LabVIEW SignalExpress for interactive data logging. M Series DAQ devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series DAQ devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• 60 VDC continuous bank isolation, 1,400 Vrms/1,950 VDC channel-to-bus isolation withstand for 5s
• 4 analog outputs, 16-bit resolution, up to 500 kS/s (6 μs full-scale settling time)
• 6 digital input and 4 digital output channels, 5 V TTL/CMOS
• 2 counter/timers, 32-bit resolution, 80 MHz
• NI-MCal calibration technology for increased measurement accuracy
• NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software

PCI-6233

The National Instruments PCI-6233 is an isolated M Series multifunction data acquisition (DAQ) board. It combines the safety and performance benefits of isolation with high-performance timing, amplification, and calibration technologies to offer accurate measurements and precise control.

Isolation provides:
1. Safety from transients
2. Noise rejection
3. Reduced ground loops
4. Common-mode voltage rejection

The PCI-6233 is ideal for test, measurement, control, and design applications in environments with high voltages and electrical noise. You can use the PCI-6233 to read from encoders, flow meters, and proximity sensors as well as control valves, pumps, and relays.

The isolated M Series family of devices incorporates advanced M Series technologies including the NI-STC 2 system controller, NI-PGIA 2 programmable instrumentation amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about and download driver software. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
With NI LabVIEW, you can create custom DAQ applications with the ease of graphical programming and power of more than 500 analysis functions. LabVIEW Full and Professional Development Systems include LabVIEW SignalExpress for interactive data logging. M Series DAQ devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series DAQ devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• 60 VDC continuous bank isolation, 1,400 Vrms/1,950 VDC channel-to-bus isolation, withstand for 5 s
• 2 analog outputs, 16-bit resolution, up to 500 kS/s
• 6 digital inputs and 4 sinking digital outputs, 24 V
• 2 counter/timers, 32-bit resolution, 80 MHz
• NI-MCal calibration technology for increased measurement accuracy
• NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software

PCI-6238

The National Instruments PCI-6238 is an isolated M Series multifunction data acquisition (DAQ) board. It combines the safety and performance benefits of isolation with high-performance timing, amplification, and calibration technologies to offer accurate measurements and precise control.

Isolation provides:
1. Safety from transients
2. Noise rejection
3. Reduced ground loops
4. Common-mode voltage rejection

The PCI-6238 is ideal for test, measurement, control, and design applications in environments with high voltages and electrical noise. You can use the PCI-6238 to read from encoders, flow meters, and proximity sensors as well as control valves, pumps, and relays; and connect up to other common 20 mA sensors.

The isolated M Series family of devices incorporates advanced M Series technologies including the NI-STC 2 system controller, NI-PGIA 2 programmable instrumentation amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about and download driver software. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
With NI LabVIEW, you can create custom DAQ applications with the ease of graphical programming and power of more than 500 analysis functions. LabVIEW Full and Professional Development Systems include LabVIEW SignalExpress for interactive data logging. M Series DAQ devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series DAQ devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• 60 VDC continuous bank isolation, 1,400 Vrms/1,950 VDC channel-to-bus isolation withstand for 5 s
• 2 analog outputs (0 to 20 mA), 16-bit resolution, up to 500 kS/s
• 6 digital input and 4 digital output, 24 V sourcing
• 2 counter/timers, 32-bit resolution, 80 MHz; digital triggering
• NI-MCal calibration technology for increased measurement accuracy
• NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software

PCI-6255

The National Instruments PCI-6255 is a high-speed multifunction M Series data acquisition (DAQ) board optimized for superior accuracy at fast sampling rates. For optimal performance using the NI PCI-6255, NI recommends using the SHC68-68-EPM cable for connector 0 and the SHC68-68 cable for connector 1. The SCC-68 or other NI signal conditioning accessories are not compatible with connector 1. Also consider the high-accuracy M Series devices with an 18-bit analog-to-digital converter for a 4X resolution increase.

High-speed M Series devices incorporate advanced features such as the NI-STC 2 system controller, NI-PGIA 2 programmable amplifier, and NI-MCal calibration technology to increase performance and accuracy. High-speed M Series devices have an onboard NI-PGIA 2 amplifier designed for fast settling time at high scanning rates, ensuring 16-bit accuracy even when measuring all channels at maximum speeds. To learn more about M Series technologies, device specifications, and information on recommended cables and accessories, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about driver software or download a driver. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
With NI LabVIEW, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. LabVIEW Full and Professional Development Systems include LabVIEW SignalExpress for interactive data logging. M Series data acquisition devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series data acquisition devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• Two 16-bit analog outputs (2.8 MS/s), 24 digital I/O, and 32-bit counters
• Correlated DIO (8 clocked lines, 10 MHz); analog and digital triggering
• NI-MCal calibration technology for increased measurement accuracy
• NIST-traceable calibration; more than 70 signal conditioning options
• High-accuracy M Series module available for improved measurement accuracy, resolution, sensitivity
• NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software

PCI-6232

The National Instruments PCI-6232 is an isolated M Series multifunction data acquisition (DAQ) board. It combines the safety and performance benefits of isolation with high-performance timing, amplification, and calibration technologies to offer accurate measurements and precise control.

Isolation provides:
1. Safety from transients
2. Noise rejection
3. Reduced ground loops
4. Common-mode voltage rejection

The PCI-6232 is ideal for test, measurement, control, and design applications in environments with high voltages and electrical noise. You can use the PCI-6232 to read from encoders, flow meters, and proximity sensors as well as control valves, pumps, and relays.

The isolated M Series family of devices incorporates advanced M Series technologies including the NI-STC 2 system controller, NI-PGIA 2 programmable instrumentation amplifier, and NI-MCal calibration technology to increase performance and accuracy. To learn more about M Series technologies, please refer to the data sheet and specifications.

Driver Software
M Series devices work with multiple operating systems using three driver software options including NI-DAQmx, NI-DAQmx Base, and the Measurement Hardware DDK. Browse the information in the Resources tab to learn more about and download driver software. M Series devices are not compatible with the Traditional NI-DAQ (Legacy) driver.

Application Software
With NI LabVIEW, you can create custom DAQ applications with the ease of graphical programming and power of more than 500 analysis functions. LabVIEW Full and Professional Development Systems include LabVIEW SignalExpress for interactive data logging. M Series DAQ devices are compatible with the following versions (or later) of NI application software – LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; LabVIEW SignalExpress 1.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. M Series DAQ devices are also compatible with Visual Studio .NET, C/C++, and Visual Basic 6.

• 60 VDC continuous bank isolation, 1,400 Vrms/1,950 VDC channel-to-bus isolation withstand for 5 s
• 2 analog outputs, 16-bit resolution, up to 500 kS/s
• 6 digital inputs and 4 sourcing digital outputs, 24 V
• 2 counter/timers, 32-bit resolution, 80 MHz
• NI-MCal calibration technology for increased measurement accuracy
• NI-DAQmx driver software and NI LabVIEW SignalExpress LE interactive data-logging software